Escort Stair Lift Installation Manual
11
TEC0016 20160714 P/N: 630-00039 Rev C
PREPARING THE RAIL
Preparation
1.
Carefully remove the charging strips from the top
end of the rail.
[Figure 11-1]
CAUTION
Do not attempt to remove the
attached center wire from the rail as
it is attached at the other end to the
bottom rail. Pull the wire out only far
enough to remove the charging strips
2.
Slide rail mounting brackets onto rail to the
approximate locations shown
[Figure 11-2 and 11-3]
.
Exact positions of brackets will be determined later.
BOTTOM SECTION
SPLICE JOINT
TOP SECTION
RAIL BRACKETS
17”
4”
12”
9”
Figure 11-1
NOTE:
The nut side of bracket goes toward the wall.
RAIL BRACKET CHANNELS
MAIN INTERIOR WIRE CHANNEL
TIP
The brackets will fi t tightly on the rail.
Loosening the bracket bolts will help
them slide easier. A short piece of
2 x 4 may also be used to gently tap
the brackets into place.
INSTALLING THE BRACKETS
S
Figure 11-2
[Figure 11-3]
