background image

4

Connect the bathtub drain to the 

fl

 oor drain.  Hook up the 

water to the faucet and gently put back the bathtub at the 

speci

fi

 ed area in step 1, and wipe off the silicone excess. 

Check that all connections are waterproof.

CARE AND MAINTENANCE

Removing Stains and Fixing Scratches or Burns

Like other high-use product, nicks, scratches and cuts are inevitable 

with Mineral Cast.  But, because Mineral Cast is solid all the way 

through, it is easy to renew to its original appearance as described 

below.

Identify the extent of the damage and ascertain whether a minor 

repair will solve the problem.  If the damage is minor, try to repair it 

with an abrasive cleanser or a common household degreaser.  Soapy 

water or ammonia-based cleaners will remove most dirt and stains 

from both types of 

fi

 nishes.

INSTALLATION STEPS

If the above step is unsuccessful, follow the simple polishing steps 

below:

Matt Finish – 

1.  Clean the surface with water and make sure no dust remains
2.  Use 400 grit sandpaper to sand the surface with no water.
3.  Clean with cloth.

Glossy Finish – 

1.  Clean the surface with water and make sure no dust 

remains.

2.  Use 800 grit sandpaper to polish the surface with water.
3.  Use 1500 grit sandpaper to polish the surface with water to 

gain a smooth surface.

4.  Use 2000 grit sandpaper to polish the surface with water to 

gain a smoother surface.

5.  Wipe the water off the surface with a dry clean cloth.
6.  Polish with G3 wax.
7.  Wipe the remaining wax with a dry clean cloth.

Preventing Heat and Other Damage

 

Avoid exposing mineral cast to strong chemicals, such as paint 

remover, oven cleaner, etc.  If contact occurs, quickly 

fl

 ush the 

surface with water.  Do not use acetone-based polish remover.

Renewing Mineral Cast 

While nicks, stains, cuts and scratches can permanently mar most 

other surfaces, they won’t compromise the appearance of Mineral 

Cast surfaces.  That’s because it is easy to restore Mineral Cast to 

its original state, using an ordinary abrasive cleanser and common 

household degreaser.  If damage does occur, mineral cast can be 

repaired on site, saving both downtime and aggravation.

6

7

Summary of Contents for Roc Series






Reviews: