Americana Building Products .
Optional Sheet A - Page 16
Aluma-Vent Installation Guide
STEP A1
To splice flashing (E), first apply an ample amount
of caulk to the back of the provided splice (L).
Position the splice equally inside two pieces of
flashing and attach using (4) #8 x 3/4” screws (AA).
STEP A2
To splice runner (C), position the provided splice
(M) equally inside two pieces of runner. Attach
using (12) #8 x 3/4” screws (AA) as shown.
A1
A2
OPTIONAL SPLICE ASSEMBLY
Longer awnings may require certain parts to be sent in more than one piece. If this happens,
follow the steps below to splice the parts before beginning assembly.
SIDE VIEW
SIDE VIEW
