![background image](http://html.mh-extra.com/html/american-woodmark-corporation/99868/99868_installation-instructions_2930178003.webp)
VertiCally beSide Wall Cabinet:
determine the wall cabinet(s) that the unit is to be installed adjacent to and
locate any wall studs in the area where the unit will be installed.
remove the drawers from the unit.
hold/clamp the unit into place, making sure that the face of the unit is flush
with the face of the adjacent wall cabinet(s) and along the bottom edge.
Using the 5/32” drill bit, drill two attachment holes through the Unit side
and into the wall cabinet frame vertical, 1/4” back from the face of the Unit,
making sure not to drill completely through the frame vertical See Figure 1.
note:
if there are not any wall studs in the wall where the unit will be
installed, move to Step 6.
Pre-drill and attach the Unit to the wall with the #10 x 2-1/2” Pan Head
screws in two places, preferably into the wall studs. do noT TighTen
SCREWS YET! See Figure 2.
secure the unit to the adjacent wall cabinet(s), with the
#6 x 1 ” Flat Head Screws in the locations drilled in Step 4. See Figure 2.
Tighten the screws placed through the back in Step 5.
spice drawer cabinet only: places the drawers back into the unit. drawer
knobs may need to be removed and oriented correctly. it is now ready to use.
See other side for installing the Unit in a horizontal position
2
Spice Drawer Cabinet or Storage Cube
1
3
7
8
Procedure
4
5
6
Spice Drawer Cab Vert
Figure 1
SC30
Storage
Cube
Figure 1
Spice Drawer Cab Vert
Figure 2
Wall Stud
Figure 2
#6 x 1" Flat Head Screw
(if no wall stud)
5/32" Pre-drilled Hole
Front View
5/32" Pre-drilled Hole
#6 x 1" Flat Head Screw
(if no wall stud)
#6 x 1" Flat Head Screw
(if no wall stud)
#6 x 1" Flat Head Screw
(if no wall stud)
99868 8/10
Installation Instructions
continued