22
23
B I X T EC H N O LO GY
ABL PAIRING
NOTE
Make sure you have
the Advanced Settings
turned on in the Short-
cut Carousel before pro-
ceeding.
• Insert battery into ABL
and turn unit on via power
switch.
• Enter the System Set-
tings menu via ca rousel
Wrench icon.
• Navigate to settings menu at far right.
• Select WiFi and Bluetooth option.
• Select ABL option in the menu.
• Select pair from the ABL dropdown
menu.
• You’ll notice the Bluetooth icon, in the
upper right of the display, you will now
have a swirling circle around it. This in-
dicates the monocular is searching for
available Bluetooth devices.
• Short press the small button on the ABL
with the Bluetooth symbol,
quickly 2 times.
• You’ll now see that the
Bluetooth icon in the upper
right of the display is en-
veloped in a colored circle.
After the pairing has com-
pleted, the ABL menu op-
tion will display “Paired”, to
the right.
• Exit the setting menu
and proceed to the PRO-
FILES/ZERO menu.
• Navigate down to the
Zeroing ABL menu op-
tion and select it. The ABL
reticle will now appear on
screen.
• Having previously re-
moved the Allen screw that
covers the visible red laser,
you can now move the ABL
reticle to the correct area
of the display to align the
reticle with the infrared
ranging laser. The visi-
ble red laser is used as
a visual reference point
for zeroing. Use the ar-
row keys on the keypad
to move the reticle to the
correct position.
• Once the box area of
the ABL reticle is cen-
tered around the red la-
ser, press the OK button
to confirm the reticle
correction.
• Exit the menu and return
to the Homescreen.
• To range a target, press
and release the Func-
tion button. The ABL ret-
icle will instantly appear
on screen. Place the
box area of the ABL reti-
cle on the desired target
and hold it there until the
ranging process times
out. You’ll now see the range in the upper left of your extended widgets has
updated and indicates the correct range to the target you just ranged.
NOTE
If you don’t want to wait for the ranging function to time out and need a
quick range measurement press the function button to initiate ranging and
press it once again to save the range to target.
X-TRAC PAIRING
• Enter the system setting from the menu.
• Select the Settings Category.
• Select the WiFi and Bluetooth subcategory.
• Select Remote Controller.
• Select Pair. You should see a half circle move around in the upper right
side of the screen around the Bluetooth Icon.
• Press and hold the Home Button and Top Arrow Button closest to the Direc-
tional Roller for 2 seconds, this will pair the X-TRAC to your monocular.
NOTE
If you need additional trouble shooting assistance or how to use the
X-Trac please refer to the X-Trac manual available online.
