background image

MODEL NUMBER

6035

Designer Shower
Massage System

8AHJE5F=

M962290-YYY0A

SPRAY TRIM KIT

M923106-0070A

FRICTION CLIP

M962292-0070A
MOUNTING KIT

- SCREWS (2) 
- ANCHOR (2)
- TOGGLE ANCHOR (2)
- DRILL BIT (1)
- TEFLON TAPE (1)

M923107-0070A

PIPE NIPPLE

M907526-YYY0A

ESCUTCHEON

M950120-YYY0A

DIVERTER UNIT

M950130-YYY0A
SHOWER HEAD

M912119-0070A

O-RING

M962291-0070A

SPRAY NOZZLES KIT

CHROME             002
                    

Replace the "YYY" with
appropriate finish code

M923112-YYY0A

END CAP

M 9 6 8 4 1 6   R E V   1 . 1

Summary of Contents for VertiSpa 6035

Page 1: ...ge 1 by turning counter clockwise Figure 1 Apply Teflon tape provided to the end of the PIPE NIPPLE 1 Figure 2 Thread PIPE NIPPLE 1 into elbow fitting using adjustable wrench and tighten Then using a hacksaw cut off excess PIPE NIPPLE 1 at the 3rd groove from the finished wall Discard the excess pipe and remove any burrs and debris from the nipple Figure 3 Install O RING 2 into groove next to fini...

Page 2: ...n 6 1 4 160mm or further than 11 3 4 300mm from the DIVERTER Figure 1 Hold Vertispa unit in desired location Refer to roughing in dimensions Mark location of the upper mounting hole Using a 3 16 carbide drill bit provided drill the mounting hole into the shower wall and install hardware See Figure 2 Caution Take care when drilling between the Diverter and the valves as water pipes maybe located he...

Page 3: ...R ARM 2 clockwise for flow out of SPRAYS 3 and counter clockwise for flow out of SHOWER HEAD 4 SHOWER HEAD SPRAY 5 can be adjusted by rotating outer ring on the faceplate Figure 3 To replace FRICTION CLIP 5 insert groove of FRICTION CLIP 5 onto inside edge of SPRAY UNIT 6 Rotate other end down and press until the FRICTION CLIP 5 snaps into position onto tab of SPRAY BODY 7 2 1 5 5 5 7 2 1 3 4 4 3 ...

Page 4: ...0A MOUNTING KIT SCREWS 2 ANCHOR 2 TOGGLE ANCHOR 2 DRILL BIT 1 TEFLON TAPE 1 M923107 0070A PIPE NIPPLE M907526 YYY0A ESCUTCHEON M950120 YYY0A DIVERTER UNIT M950130 YYY0A SHOWER HEAD M912119 0070A O RING M962291 0070A SPRAY NOZZLES KIT CHROME 002 Replace the YYY with appropriate finish code M923112 YYY0A END CAP M968416 REV 1 1 ...

Reviews: