- 4 -
M965907 Rev. 1.2 (8/19)
COLD
1
2
3
HOT
5
4
8
7
6
3-1/2"
SIDE VIEW
n
Finished wall should allow for a 3-1/2" diameter opening.
n
Discard or throw away PLASTER GUARD
(8)
.
n
Thread MOUNTING PLATE
(4)
on to the valve with the two SCREWS
(5)
.
n
Install Mounting Screws
(7)
through Escutcheon Holder
(8)
and into Threaded holes
(6)
.
Tighten Mounting Screws
(7)
Securely.
Note:
MOUNTING PLATE
(4)
, Mounting Screws
(7)
, Escutcheon Holder
(8)
, and the two SCREWS
(5)
can be found
packaged with the Belshire Trim rather than the valve.
n
Connect HOT and COLD water supplies per connection method of selected valve.
n
Connect RISER PIPE
(1)
to VALVE BODY
(2)
top outlet marked “UP”.
n
Connect TUB FILLER PIPE
(3)
to bottom outlet.
n
Service stops are primarily used to shut water off. To shut “HOT” or “COLD” water using a flat head screwdriver,
turn the head of the screw vertically. And to turn the water back on, turn the screw horizontally.
THIN WALL INSTALLATION FOR BELSHIRE TRIMS
3
CAUTION
Turn off hot and cold water
supplies before beginning.
