background image

MODEL NUMBER

CHROME
STAINLESS STEEL

002
075

Replace the "YYY" with

appropriate finish code

M 9 6 8 5 8 2

4335.020.XXX

HOT LINE FOR HELP

For toll-free information and answers to your questions, call:

1 (800) 442-1902

Weekdays 8:00 a.m. to 6:00 p.m. EST

IN CANADA  1-800-387-0369   (TORONTO 1-905-306-1093)

Weekdays 8:00 a.m. to 7:00 p.m. EST

Product names listed herein are trademarks of American Standard Inc.
© AS America, Inc. 2008

IN MEXICO  01-800-839-12-00

M962674-0070A

SPOUT BUSHING

& O-RING KIT

M962675-YYY0A

SPRAY END

M962677-YYYOA

SPOUT

M962676-0070A

SEAL

M962673-0070A

SEAL

M962653 -0070A

CARTRIDGE NUT

M962654-YYY0A

CARTRIDGE COVER

M962682-0070A

CARTRIDGE

M962681-YYY0A

HANDLE KIT

M962672-0070A

MOUNTING KIT

M906667-0070A

FIXATION RING

SINGLE CONTROL KITCHEN

POP-OUT SPRAY

PEKOE EXTENDER

  

M962652-0070A

SPOUT SET SCREW

Summary of Contents for Pekoe Extender Single Control Kitchen Pop-Out Spray 4335.020.XXX

Page 1: ...k or mounting surface Assemble RUBBER WASHER 4 PLASTIC WASHER 5 METAL WASHER 6 and threaded LOCKNUT 7 onto SHANK 3 from underside of sink or mounting surface Hand tighten LOCKNUT 7 and check that faucet is centered Use a screwdriver to tighten SCREWS 8 on LOCKNUT 7 Work your way around LOCKNUT 7 tightening the screws slightly each time until all are snug to ensure even pressure Tubing Cutter 1 2 5...

Page 2: ...not over tighten Faucet supplies are 27 1 2 long from faucet base Note If additional supply length is required installer must purchase additional parts separately Important If SUPPLY HOSES 1 2 are too long loop as illustrated to avoid kinking 1 2 COLD HOT 3 3 TEST INSTALLED FAUCET Unthread SPRAY END 2 from SPOUT 3 Turn on water supplies and check connections for leaks Operate HANDLE 1 on and off h...

Page 3: ...ks at swivel point the O RINGS 2 need to be replaced To remove SPOUT 1 Turn faucet to off position Loosen the SPOUT SET SCREW 3 with a 3mm Hex wrench Rotate the SPOUT 1 side to side while pulling upward to remove SPOUT 1 from faucet body Replace the defective parts and grease O RINGS 2 Push SPOUT 1 back into position Tighten SET SCREW 3 Check that SPOUT 1 rotates freely and does not leak at the sw...

Page 4: ... a m to 7 00 p m EST Product names listed herein are trademarks of American Standard Inc AS America Inc 2008 IN MEXICO 01 800 839 12 00 M962674 0070A SPOUT BUSHING O RING KIT M962675 YYY0A SPRAY END M962677 YYYOA SPOUT M962676 0070A SEAL M962673 0070A SEAL M962653 0070A CARTRIDGE NUT M962654 YYY0A CARTRIDGE COVER M962682 0070A CARTRIDGE M962681 YYY0A HANDLE KIT M962672 0070A MOUNTING KIT M906667 0...

Reviews: