7301812-100
- 2 -
1
a. Turn the water supply OFF.
b. Install or relocate the supply tubing and waste pipe as necessary
to conform to the roughing in dimensions.
c. Install the shut off valve.
d. Install adequate support framing for the wall hanger as needed.
PREPARATION
a. Install the wall hanger according to the roughing in illustration.
b. Apply thread sealant tape to the pipe threads and install the coupling nut and tailpiece to the waste “U” pipe.
c. Carefully position the urinal on the wall hanger.
d. Secure the urinal to the wall using the screws and washers provided.
INSTALL THE URINAL
2
CAUTION: RISK OF PERSONAL INJURY OR PRODUCT DAMAGE. HANDLE WITH CARE.
VITREOUS CHINA CAN BREAK OR CHIP IF THE PRODUCT IS HANDLED CARELESSLY.
!
CAUTION: RISK OF PRODUCT DAMAGE. DO NOT OVERTIGHTEN THE BOLTS.
!
a. Install the flush valve according to the manufacturer’s instructions.
b. Connect the water supply and complete the waste pipe connections.
c. Turn on the water supply.
d. Flush and check the entire installation for leaks.
COMPLETE THE INSTALLATION
3
Wash with mild soapy water and rinse thoroughly. Dry with a soft cloth. Avoid detergents, disinfectants or cleaning
products in aerosol cans as they may damage fittings.
CARE & CLEANING
Screw
Washer
In the United States:
American Standard Brands
P.O. Box 6820
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: (800) 442-1902
www.americanstandard.com
In Canada:
AS Canada, ULC
5900 Avebury Rd.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: (800) 387-0369
www.americanstandard.ca
In Mexico:
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 01-800-839-1200
www.americanstandard.com.mx
Wall Hanger
Support
Wall
Inlet Spud
Coupling Nut
and Tailpiece
Installed Wall Hanger
Outlet Spud
1-1/2" x 1-1/2"