HD-10
© 2007 American Standard Inc.
LIFETIME™ OVAL
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
Revised 7/07
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL APRON 9266.018 OR 9366.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
66"
(1676mm)
5-3/8"
(137mm)
6"
(152mm)
36"
(914mm)
8-1/4"
(210mm)
3"
(76mm)
11-1/4"
(286mm)
36"
(914mm)
18"
(457mm)
19-3/4"(H)
(502mm)
18-1/4"(C)
(464mm)
C/L OF
DRAIN
15-1/4"(A)
(387mm)
CUT
OUT IN FLOOR
FOR
DRAIN
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
66 x 36 x 19-3/4 In.
(1676 x 914 x 502mm)
96 Lbs. (44 Kg.)
580 Lbs. (263 Kg.)
58 Gal. (219 L)
42 Gal. (159 L)
49 x 26 In. (1245 x 660mm)
62 X 32 In. (1575 x 813mm)
12-3/4 In. (324mm)
35 Lbs./Sq.Ft. (171 Kgs./Sq.m)
GENERAL SPECIFICATIONS FOR 2645L BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.4 HP, 9.7 AMPS, 120V.
PUMP