background image

1378872-A02-A           5/03/2019

INSTALLATION 
INSTRUCTIONS

BATHS

Englefield

MILANO Solid Surface FS Baths

 

Englefield has a history of

making superb baths and

their popularity is testament to

their quality and affordability.

It’s the details that Englefield

cares about - from pioneering

the latest technology, to

innovative design, it’s all to

make your bathing

experience the very best it

can be. 

ROUGH IN DIMENSIONS

NOTE:

 Check the rough-in and room dimensions to provide adequate available 

space for the bath unit. Arrange the location of the drain in advance and ensure 

that the flooring is prepared to allow space for the drain. Ensure that the floor is level.

800

1700

540

1146

542

TM

WARNING:

 The Milano Solid Surface Freestanding bath is very heavy. Please make

sure that the floor is structurally sound and provides adequate support for the bath, 

water and the user. A mechanical lifting device is advised when manoeuvring the 

bath.

   

Summary of Contents for ENGLEFIELD MILANO FS

Page 1: ... the very best it can be ROUGH IN DIMENSIONS NOTE Check the rough in and room dimensions to provide adequate available space for the bath unit Arrange the location of the drain in advance and ensure that the flooring is prepared to allow space for the drain Ensure that the floor is level 800 1700 540 1146 542 TM WARNING The Milano Solid Surface Freestanding bath is very heavy Please make sure that...

Page 2: ...Solid Surface FS bath and report any damage to us Installers are responsible for damage that occurs during installation and no claims for damages will be accepted once the bath has been installed INSTALLATION INSTRUCTIONS MILANO Solid Surface FS Baths BEFORE YOU BEGIN TOOLS AND MATERIALS REQUIRED ENGLEFIELD CONCRETE SLAB FLOOR PREPARATION IF APPLICABLE Note Instructions drawings and diagrams conta...

Page 3: ...S 3500 plumbing standard INSTALLATION 3 Connect the waste outlet to the drain Check to see that all connections are firmly tightened 4 Close off the waste and fill the bath with water allow the water to stand for at least 30 minutes check for leaks Attend to waste and pipe connections as necessary 2 Raise the Free Standing bath off the floor by propping it up onto timber blocks positioned at eithe...

Page 4: ...in lukewarm water for a couple of minutes before running hot water It is recommended the hot water be no more than 60 C For warranty information please visit our website CLEANING AND MAINTENANCE INSTRUCTIONS Installation complete MILANO Solid Surface FS Baths TM 5 Carefully slide the timber blocks out and gently lower the bath into place Apply an appropriate silicone sealant ensuring a watertight ...

Reviews: