Page 3
INSTALLATION INSTRUCTIONS
ENGLEFIELD
CONTACT AND WARRANTY INFORMATION
NEW ZEALAND
KOHLER NZ LTD
Free Ph: 0800 100 382
Free Fax: 0800 664 488
www.englefield.co.nz
AUSTRALIA
KOHLER CO.
Free Ph: 1 800 ENGLEFIELD
(1 800 364 533)
www.englefield.com
1) Please refer to the Homeowner’s Guide for cleaning instructions.
2) Because baths are often placed on cold floors, and Solid surface baths are sensitive
to thermal shock, it is highly recommende in cold periods, to run in lukewarm water for
a couple of minutes before running hot water. It is recommended the hot water be no
more than 60 C.
For warranty information, please visit our website.
CLEANING AND MAINTENANCE INSTRUCTIONS
Installation complete.
MILANO Solid Surface FS Baths
TM
5) Carefully slide the timber blocks out and gently lower the bath into place. Apply an
appropriate silicone sealant, ensuring a watertight seal between the bath and adjacent
surfaces.
3) Light scratches can be removed, if necessary, with very fine sandpaper. It is
recommended to start with 1200 grade followed by 2500 grade. Finally use car cutting
compound to polish the area to recover the gloss surface.
