FB104
、
FB105
、
FB109
0.35 - 1.8 L/min
0.35 - 1.8 L/min
Status
Cause
Solution
Water is too low during
WASH/BIDET
1. Low water pressure of the unit
2. Low water pressure of water supply
During WASH/BIDET, turn the lever fast to biggest volume
When water supply pressure is lower than 0.7kgf/cm , contact
local department for water pressure question
No water comes out
during WASH/BIDET
1. Water shut-off valve is turned off
Turn on the water shut-off valve
2. Filter net of T-shaped connector is stuck Clean the filter net of T-shaped connector
3.Filter net of water inlet hose is stuck
Clean the filter net of water inlet hose
4. Nozzle head is stuck
Take off and clean the nozzle head.
5. External water pressure is low
Increase external water pressure.
Water dropping from bowl
when using the unit
The maximum water pressure of the unit is 0.8MPa . If water supply
pressure is higher than that, please contact local department for water
pressure question.
External water pressure is too big
If any failure still occurs after above trouble-shooting, please contact local service.
Classification
Description
FB104
、
FB105
、
FB106
、
FB107
、
FB108
、
FB109
Model No.
Check valve, vacuum breaker
Water Supply
Direct from water pipes
Water Pressure Range
Dimensions
Weight
Caution
Do not disassemble, repair or remodel the unit.
Self Diagnosis and Trouble shooting
WASH water flow
BIDET water flow
Backflow Prevention
Specifications
Thank you for choosing the product! If failure or damage occurs, please
check the product based on the trouble shooting guide in this manual first.
If the failure/damage could not be fixed, please contact the retailer or local
service center with proof of purchase.
FB106
、
FB107
FB108
FB104: 2.23 KG
FB105: 2.22 KG
FB106: 2.09 KG
FB107: 2.08 KG
FB108: 2.00 KG
FB109: 2.16 KG
370X500X62mm
370X480X62mm
370X500X60mm
Static pressure:0.07- 0.8 MPa,Dynamic pressure:above 0.03MPa
6
9
Summary of Contents for FB104
Page 7: ......
