M 9 6 5 0 4 1 Rev 1. 3
SERVICE
4
To change direction of handle rotation, proceed as follows:
Turn HANDLE to OFF position.
Remove HANDLE SCREW and HANDLE.
Remove SPRING CLIP
(1)
.
Lift STOP WASHER
(2)
, turn 90
°
and replace.
Replace SPRING CLIP
(1)
.
Replace HANDLE and HANDLE SCREW.
If spout drips, operate handles several times from OFF to ON position.
Do not force - handles turn only 90
°
.
90
°
3
1
2
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS:
Turn HANDLES
(1)
TO
OFF
POSITION.
Slowly turn water supplies on and
check all connections for leaks.
Operate HANDLES
(1)
to flush water
lines thoroughly.
Turn HANDLES
(1)
to
OFF
position.
Thread ESCUTCHEONS
(2)
against
finished wall.
TEST FAUCET
2
5
3
4
6
2
2
1
1
FINISH INSTALLATION
90˚
8"
OFF
ON
Slide COUPLING NUTS
(5)
onto INLET SHANKS
(3
).
Thread ESCUTCHEONS
(2)
fully onto INLET SHANKS
(3)
.
Thread INLET SHANKS
(3)
onto SUPPLY NIPPLES
(1)
. Distance
between INLET SHANK
(3)
outlets must be 8" to match the VALVE.
Insert RUBBER WASHERS
(4)
into INLET SHANK
(3)
.
Attach VALVE
(6)
to INLET SHANKS
(3)
. Tighten both
COUPLING NUTS
(5)
firmly.
