OWNERS MANUAL
4
RESPONSIBILITIES OF THE INSTALLER
The Installer must
inspect
and
water test
the product prior to installation to ensure the unit is free of defect
and /or damage. In the event of a problem, the unit
must not be installed.
If the packaging or product has
been damaged, please call immediately at 1-866-423-0800.
This product has been listed by INTERTEK / ETL and IAPMO / C UPC. The product has been tested and
complies with the following standards and guidelines: IAPMO /C UPC, UL-1795, ANSI Z-124.1.2,
ASME A 112.19.7, ASME A 112.19.15 & CSA B-45.
The installer
is responsible for compliance to
state and local codes.
This product is designed to be installed by a
licensed tradesperson
.
Licensed plumbers and electricians
should be employed to insure proper installation.
Installer assumes all liabilities for installation
procedures.
Although American Standard® has taken reasonable precautions to ensure that the Quick Drain
TM
is
suitable for residential plumbing; it is the
responsibility of the installer
to insure that the plumbing is
acceptable for use of the Quick Drain
TM
.
American Standard® does not accept responsibility for
damage arising from use of the Quick Drain
TM
.
Only accessories authorized by manufacturer should be used with this product.
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE,
ELECTRICAL SHOCK OR INJURY TO PERSONS
SAVE THESE INSTRUCTIONS!
WARNING! ALL INSTRUCTIONS LISTED IN THIS MANUAL SHOULD BE READ AND
FOLLOWED CAREFULLY. ALL PRECAUTIONS PERTAINING TO RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSONS MUST BE UNDERSTOOD AND
EXPLAINED TO OWNER.
TO REDUCE THE RISK OF INJURY, CHILDREN OR PERSONS WITH INFIRMITIES
MUST NOT BE PERMITTED TO USE THIS PRODUCT WITHOUT CLOSE AND
CONTINUOUS SUPERVISION.
