background image

1

NOTE:

 

This food waste disposer has been designed to operate on 110-120 Volt, 60 Hz 
exclusively. Using any other voltage or Hz adversely affects performance.

IMPORTANT: 

 

Read all instructions thoroughly. Keep this guide for future reference.

CAUTION:

 

Be sure to review SAFETY INSTRUCTIONS FIRST PERTAINING TO A RISK OF 
FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS before using disposer.

Record important disposer information here

Model Number*

Serial Number*

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY 

TO PERSONS. SAVE THESE INSTRUCTIONS.

WARNING – When using electrical appliances, 

basic precautions should always be followed, 

including the following:

 1.  Read all instructions before using the appliance.
 2.  To reduce the risk of injury, close supervision is 

necessary when an appliance is used near children.

 3.  Do not put fingers or hands into a waste disposer.
 4.  Turn the power switch to the off position before 

attempting to clear a jam or remove an object from the 

disposer.

 5.  When attempting to loosen a jam in a waste disposer, 

use a long wooden object such as a wooden spoon or 

the wooden handle of a broom or mop.

 6.  When attempting to remove objects from a waste 

disposer use long-handled tongs or pliers. If the 

disposer is magnetically actuated, non-magnetic tools 

should be used.

 7.  To reduce the risk of injury by materials that may be  

expelled by a waste disposer, do not put the following 

into a disposer: clam or oyster shells; caustic drain 

cleaners or similar products; glass, china or plastic; 

large whole bones; metal, such as bottle caps, tin 

cans, aluminum foil or utensils; hot grease or other 

hot liquids; whole corn-husks.

 8.  When not operating a disposer, leave the stopper in 

place to reduce the risk of objects falling into the 

disposer.

 9.  DO NOT operate disposer unless splash guard is in 

place. 

10.  For proper grounding instructions see the ELECTRICAL 

CONNECTIONS portion of this manual.

The receptacle to which this appliance is 
connected must be controlled by a switch.

*Above information appears on the label affixed to the bottom of the disposer. For your convenience, 

write down the model and serial number prior to installation. 

Proof of purchase is required for 

Warranty.

 

Staple receipt or proof of purchase to this manual for easy reference.

 

Warranty is non-transferable.

Having Problems? Don't go back to the store. 

Call us toll-free at 1-888-856-6322 for assistance.

M-F 8:00am-5:00pm PST  English & Spanish

Joneca Corporation 4332 E. La Palma Avenue   Anaheim, California 92807  Telephone: 714.993.5997  Fax: 714.993.2126

 E-Mail: [email protected]    Monday through Friday, 8 am to 5 pm PT (English and Spanish)  www.joneca.com

Food Waste Disposer Instruction Manual

ITM. / ART. 1397464,1397461

1-888-8JONECA  1-888-856-6322

®

IM-ASD-HT-ENG-FR191

Summary of Contents for 1397461



















Reviews: