American Sanders 07158A, Operator'S Manual

Page: 7 / 25

EN ENGLISH
-6- FORM NO. 71073A
Clarke ®
American Sanders Operator's Manual (EN) - CAV 12
Action Cause
Problem
Figure 5
MAINTENANCE AND REPAIR
CAUTION: Before cleaning and servicing the machine, always
remove the power cord.
Carry out only maintenance operations described in these operating instruc-
tions. Use only original Clarke service parts.
CAUTION: Do not make any technical modi fi cations to the ma-
chine. Your safety could be endangered as a result!
For all other maintenance and repair work, please contact an
authorized service department.
Replacing The Filter Element
1. Switch off the machine and pull the plug of the power cord out of the
plug socket.
2. Remove the machine top section from the dirt tank and place to one
side with the fi lter element facing upwards (Figure 5).
3. Unscrew the fi lter retaining nut (1) and remove together with the retain-
ing washer (2).
4. Pull off the fi lter element (3).
5. Push on a new fi lter element.
6. Fit the fi lter retaining washer and tighten the retaining nut.
7. Dispose of the used fi lter element in accordance with the local waste
disposal regulations.
TROUBLESHOOTING
Motor does not start.
1. The fuse or plug socket has blown. 1. Reset the fuse
2. Overload protection switch has tripped. 2. Allow the machine to cool down approximately
5 minutes; if the machine does not start again
automatically, contact the Service Dept.
Reduced suction power.
1. Bag-type fi lter full. 1. Replace bag-type fi lter.
2. Suction hose clogged. 2. Clean suction hose.
3. Filter element clogged. 3. Clean and replace fi lter element.
No suction power during
wet cleaning.
1. Tank full ( fl oat switch closing off the
suction opening).
1. Empty tank.