StorTrends® 2401 Setup Guide
5
WARNING!
SERVER PRECAUTIONS
•
REVIEW THE GENERAL SAFETY PRECAUTIONS.
•
DETERMINE THE PLACEMENT OF EACH COMPONENT IN THE RACK BEFORE
YOU INSTALL THE RAILS.
•
INSTALL THE HEAVIEST SERVER COMPONENTS ON THE BOTTOM OF THE
RACK FIRST, AND THEN WORK UP.
•
USE A REGULATING UNINTERRUPTIBLE POWER SUPPLY (UPS) TO PROTECT
THE SERVER FROM POWER SURGES, VOLTAGE SPIKES AND TO KEEP YOUR
SYSTEM OPERATING IN CASE OF A POWER FAILURE.
•
ALLOW THE POWER SUPPLY UNITS AND HARD DISK DRIVE TO COOL BEFORE
TOUCHING THEM.
•
ALWAYS KEEP THE RACK'S FRONT DOOR AND ALL PANELS AND
COMPONENTS ON THE SERVERS CLOSED WHEN NOT SERVICING TO MAINTAIN
PROPER COOLING.
•
WHEN REMOVING THE HARD DISK DRIVE, UNLOCK THE LATCH AND WAIT
APPROXIMATELY ONE MINUTE TO ALLOW THE HARD DISK DRIVE MOTOR TO
STOP BEFORE PULLING THE HARD DISK DRIVE OUT.
