StorTrends® 2401 Setup Guide
11
Quick Rail Installation
Sliding the rear of the outer rack rail until it comes into contact with the back post. Make
sure that the outer rack rail is level and secure it to the port in the same manner as you did
with the front of the outer rack rail.
Secure the outer rack rail to the rack posts with four screws. Two for the front post and
two for the rear post.
Repeat this process with the remaining outer rack rail.
Line up the inner rack rails of the chassis with the outer rack rails on the rack.
Slide the chassis into place until it comes to a stop.
Verify that both sides of the chassis come to a stop at the same location.
Lift the locking tab on the inner rack rails so that you can slide the chassis all the way
into the rack.
1
2
1
2
PUSH
Right Side
Left Side
