background image

StorTrends® 2401 Setup Guide 

1

 

 

StorTrends® 2401 Setup Guide 
(StorTrends iTX version 2.7) 

 

MAN-2401-SG 
04/15/2011 

 

© Copyright 1985-2011 American Megatrends, Inc. 
All rights reserved.  
American Megatrends, Inc. 
5555 Oakbrook Parkway, 
Building 200 
Norcross, GA 30093 
 

This publication contains proprietary information that is protected by copyright. No part 
of this publication can be reproduced, transcribed, stored in a retrieval system, translated 
into any language or computer language, or transmitted in any form whatsoever without 
the prior written consent of the publisher, American Megatrends, Inc.  
 
All trademarks and trade names used in this document refer to either the entities claiming 
the marks and names or their products. American Megatrends, Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 
 

Revision History 

 

08/30/2010 Initial 

Release 

10/23/2010 

Update product name and screens 

11/01/2010 

Updated raw drive support per enclosure to 24 TB from 16 TB 

12/14/2010 

Edit Create Share Name section regarding spaces and quotes (cannot use quotes) 

04/15/2011 

Added Licensing Information and Updating and Removed Maximum Physical and 
Theoretical Capacity Information 
 

 

NOTE: 

 
All screen captures are for representative purposes only. Your actual screen may look 
different. You may have a newer version and build of the StorTrends software and/or a 
different hardware configuration; such as a different StorTrends storage appliance. Most 
of the screen captures found in this document where taken from the StorTrends 3200 
storage appliance. However, the basic usage remains the same. 

 

 

 

Summary of Contents for StorTrends 2401














































Reviews: