American Megatrends Goliath User Manual Download Page 2 | Manualshive

Page: 2 / 80

background image

Goliath PCI Pentium Pro EISA System User’s Guide

ii

© Copyright 1996 American Megatrends, Inc.
All rights reserved.
American Megatrends, Inc.
6145F Northbelt Parkway
Norcross, GA 30071

This publication contains proprietary information which is protected by copyright. No part of this publication may be reproduced, transcribed,
stored in a retrieval system, translated into any language or computer language, or transmitted in any form whatsoever without the prior written
consent of the publisher, American Megatrends, Inc.

Limited Warranty

Buyer agrees if this product proves to be defective, that American Megatrends, Inc. is only obligated to replace or refund the purchase price of this
product at American Megatrends’ discretion according to the terms and conditions on the warranty card. American Megatrends shall not be liable
in tort or contract for any loss or damage, direct, incidental or consequential. Please see the Warranty Registration Card shipped with this product
for full warranty details.

Limitations of Liability

In no event shall American Megatrends be held liable for any loss, expenses, or damages of any kind whatsoever, whether direct, indirect,
incidental, or consequential, arising from the design or use of this product or the support materials provided with the product.

Trademarks

Intel and Pentium Pro are registered trademarks of Intel Corporation.
MS-DOS, Microsoft Word, and Microsoft are registered trademarks of Microsoft Corporation. Microsoft Windows, Windows 95, and Windows
NT are trademarks of Microsoft Corporation.
SMC is a registered trademark of SMC Corporation.
IBM, AT, VGA, PS/2, OS/2, and EGA are registered trademarks of International Business Machines Corporation. XT and CGA are trademarks of
International Business Machines Corporation.
Fujitsu is a registered trademark of Fujitsu America, Inc.
Motorola is a registered trademark of Motorola Corporation.
Hitachi is a registered trademark of Hitachi America, Ltd.
PNY is a registered trademark of PNY Corporation.
Oki is a registered trademark of Oki America, Inc.
NEC is a registered trademark of NEC Corporation.
Samsung is a registered trademark of Samsung Electronics Corporation.
Siemens is a trademark of Siemens Corporation.
Mitsubishi is a registered trademark of Mitsubishi Electronics of America.
Micron is a registered trademark of Micron Corporation.
SCO, UnixWare, and Unix are registered trademarks of The Santa Cruz Operation, Inc..
Toshiba is a registered trademark of Kabushiki Kaisha Toshiba.
VESA is a trademark of the Video Electronics Standards Association.
All other brand and product names are trademarks or registered trademarks of their respective companies.

Revision History

5/19/96

Initial release.

6/7/96

Updated for new BIOS release.

«
1
2
3
4
...
»

Summary of Contents for Goliath

















































































Reviews:

No comments

Related manuals for Goliath

AIMB-562 series

Brand: Advantech Pages: 59

VAR-SOM-MX8M-NANO

Brand: Variscite Pages: 2

KEMX-1600 Series

Brand: Quanmax Pages: 74

Brand: IWILL Pages: 48

Freescale MC9S08MM128

Brand: NXP Semiconductors Pages: 12

Brand: VIA Technologies Pages: 86

Brand: Vox Technologies Pages: 36

Brand: JETWAY Pages: 41

Brand: Biostar Pages: 40

Brand: EVGA Pages: 128

Brand: Gigabyte Pages: 113

D2550ITX Series

Brand: Zotac Pages: 50

Brand: AOpen Pages: 8

Brand: TYAN Pages: 59

M3A78-CM - Motherboard - Micro ATX

Brand: Asus Pages: 96

Brand: Asus Pages: 116

Brand: Asus Pages: 60

Brand: Asus Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands