American Magnetics 430, Installation, Operation And Maintenance Instructions

Page: 120 / 254

104 R
EV
9
A
MERICAN
M
AGNETICS
, I
NC
. O
PERATION
: S
ETUP
S
UBMENU
D
ESCRIPTIONS
: N
ET
S
ETTINGS
S
UBMENU
Using the keypad, type the current 4-digit (maximum) numeric
password and press
ENTER
. The default password is 1234. If an
incorrect password is entered, the Model 430 Programmer beeps
and again prompts for the password. Once the password has
been correctly entered, the user is prompted for the new
password.
Using the keypad, type the new 4-digit (maximum) numeric
password and press
ENTER
. The user is then prompted to re-
enter the new password for confirmation.
Using the keypad, again type the new 4-digit (maximum) numeric
password and press
ENTER
. If the second password entry does
not match the first password entry, the Model 430 Programmer
beeps and the user is prompted again to re-enter the new
password. The new password is not accepted until it is confirmed
by entering the same password a second time. If
ESC
is pressed
before confirmation is completed, the display returns to the
Settings Password submenu, and the current password remains
unchanged.
N
ET
S
ETTINGS
S
UBMENU
Selecting the Net Settings submenu allows all currently assigned
network settings to be
viewed
(but not edited). To
edit
network settings,
select the Net Setup submenu.
A
DDR
A
SSIGNMENT
(P
RESENT
)
This submenu item displays the currently selected method of IP
address assignment. The value will either be DHCP or Static.
The default value is DHCP, which means that the system IP
address, the subnet mask and the gateway IP address are
dynamically determined by the network DHCP server.
+50.00 A — Enter New Password*
+0.50 Vs _
+50.00 A — Enter New Password Again*
+0.50 Vs _
+50.00 A — Addr Assignment (Present)
+0.50 Vs DHCP