American-Lincoln 505-945, Instructions For Use Manual, Page: 27 / 47

26 - FORM NO. 56041764 - SR5730
Fig. 34
OPERATING INSTRUCTIONS
SCRUBBING PATH
* Try to scrub in as straight a path as possible. Avoid bumping into posts or scraping the sides of the machine.
* When placing the machine in motion, avoid slamming the directional control pedal all the way forward suddenly. This is equivalent to starting out
in “HIGH” and puts needless strain on the drive system. Periodically, turn the sweeping broom end for end to prevent the bristles from “settling”
in one direction.
* Plan your sweeping and scrubbing in advance. Try to arrange long runs with minimum stopping and starting. Sweep debris from narrow aisles
out into main aisle ahead of time. Do an entire
fl oor, or section at on time.
* Pick up oversize debris before sweeping.
* Allow a few inches of overlap of sweep and scrub paths. This will eliminate leaving dirty patches.
* Don’t turn steering wheel to sharply when machine is in motion. The machine is very responsive to movement of the steering wheel; so avoid
sudden turns.
TO STOP THE CLEANING OPERATION
Discontinue the cleaning operation when the low solution light or the high recovery light illuminate
s, this indicates the solution tank is empty
or recovery tank is full. Discontinue the scrubbing cycle, put all controls in the forward position for transport and drive to the
drain area.
NOTE: After stopping, perform these post operation checks.