American-Lincoln 505-945, Instructions For Use Manual, Page: 17 / 47

16 - FORM NO. 56041764 - SR5730
BRUSH SWITCH
SCRUB
PRESSURE
SWITCH
BATTERY STATUS
METER
DECK SCRUBBING
PRESSURE METER
SCRUB
BRUSHES ON
SOLUTION
FLOW ON
SOLUTION
FLOW
METER
SCRUBBING
DOWN
PRESSURE
Fig. 16
Fig. 17
CONTROLS
SCRUB BRUSH SWITCH
The scrub brush switch is located on the left side of the console to right of the solution control knob as shown in fi gure 16. Pushing the scrub brush
switch to up position will raise the scrub deck to the top position, the scrub brushes will stop rotating, the water solenoid will de-energize and solution
fl ow will stop. Pushing the scrub brush switch down will lower the scrub deck to the set down pressure. The squeegee will lower and the vacuum will
activate. When the scrub brush and squeegee are on, they will be displayed as shown in fi gure 17. The brushes will not rotate until the foot throttle
is depressed. Releasing the foot throttle will raise the scrub deck to the top position and the brushes will stop rotating.
SCRUB PRESSURE SWITCH
The scrub pressure switch is located on the left side of the console between scrub brush switch and the squeegee/vacuum switch as shown in fi gure
16. Pushing the scrub pressure switch up selects the next highest scrub setting available, increasing pressure. Selected pressure is displayed as a
bar on the LCD control panel. Pressing the scrub pressure switch down selects the next lowest setting available, decreasing pressure as shown in
fi gure 17.