CONTROLLER OVERVIEW
NOTE: The following controllers are compatible with the single color IP65 tape light. Alternatively, use the Trulux application with one or
more WIFI receivers (REC-5A-4Z-WIFI); one receiver is needed for each zone.
Visit www.americanlighting.com/truluxapp.html for a direct access link or visit the App Store or Google play marketplace to download the
Trulux application.
1. Determine which controller is best suited for your application. See list below.
2. Select a receiver for each zone. For RF controllers, use one REC-5A-4Z for each zone. For the Trulux app, use one REC-5A-4Z-WIFI for each
zone. For WIFI setups with 2-8 zones, you will need a WIFI hub (WIFI-RF-8, sold separately). You can use a REC-5A-4Z-WIFI in conjunction with
wall mount and/or handheld controllers; in addition to using the App.
CONTROLLER
POWER TO CONTROL
RECEIVER ITEM #
CAPACITY
POWER TO RECEIVER
SRF-BATT (White, dial)
3V Battery (CR203, included)
REC-5A-4Z
1 zones, 5A max
24V DC input
SRF-4Z-3P (White, touch)
24V DC input (not 120V!)
REC-5A-4Z
4 zones, 5A max
24V DC input
See Figure 3 for an example of a multiple zone system. However, note that you can have receivers “learn” which zone they control, so if
you teach them all to respond to one zone, then Figure 3 represents a single zone system that has multiple runs of Trulux.
Page 3 of 4
11775 E. 45th Ave. Denver, CO 80239 Ph: 1-800-880-1180 Fax: 303-695-7633
©2017 American Lighting, Inc. REV1743 www.AmericanLighting.com
FIGURE 5
Supply the receiver
with 12V DC power,
matching polarity:
red = (+) and black = (-)
SR-1009FA
LED CONTROLLER
Learning
Key
ww re
d 1
cw
gr
een 2
ww blue 3
cw whit
e
4
Receiver requires
12V input
Connect lead wires from tape light
to receiver, matching polarity:
red = (+) and black = (-)
RECEIVER
TAPE LIGHT LAYOUT EXAMPLES USING L, T AND X CONNECTORS
AWM 2468 22AWG 80°C 300V AWM cRI AWM 2468 22AWG 8
0°C 300V AWM cRI
TRULUX
®
HIGH OUTPUT MAX
24V
INSTALLATION INSTRUCTIONS
HTMR Series
