INSTRUCTIONS FOR LEVELING A POOL TABLE
Assemble pool table according to the instruction.
Any type of level would be sufficient to perform this procedure. However, a two-foot level is
recommended.
Before leveling, make sure level is placed on the playing surface, not the rails.
Level the ends between the corner pockets: Place the level on the playing surface between
the two corner pockets and adjust the height by placing shims (#15) underneath the leg
opposite of which the bubble in the level favors until the bubble rests in the middle of
the level.
Repeat the step above to the opposite corner pockets.
Next, level the length of the table. Place the level next to the side pocket and adjust the
height to position the bubble in the middle of the level, using the shims beneath the leg
opposite of which the bubble in the level favors.
Repeat the step above to the opposite length of the table.
Recheck both short ends to ensure bubble is in the middle on the level.
Depending on the surface the pool table sits, especially deep pile carpenting, the pool table
needs to settle for 24 hours. Recheck the level on each side of the table after 24 hours.
UN-LEVEL
UN- LEVEL
LEVEL
Add Shim
Add Shim
©
202 0 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
7
All Rights Reserved.
