American Landmaster Hifonics Thor Installation Instructions Download

Page: 2 / 4

17265

Using a ½” socket and ratchet and wrench, remove the four bolts that

secure the hood to the frame so the hood can be lifted off the unit. The

bolts are located on either side of the unit behind the model decal and at

the front of the unit on either side of the hood logo. See figure 1 .

Remove the cover from the electrical cover with a 5/16” socket or

wrench. See figure 2.

Slide the t-slot nut into the channel on the soundbar housing, with one at

each end of the channel. Tighten the screws to secure them in place.

figure 1

figure 3

figure 2

figure 4

STEP 1

Using the four M5 x 10mm socket head cap screws, secure the t-slot nut

to the retaining side of the pipe clamp with a 4mm allen wrench. Do not

tighten these screws. See figure 3.

STEP 3

STEP 2

STEP 4

Summary of Contents for Hifonics Thor

Page 1: ...an LandMaster with any questions or discrepancies American LandMaster cannot assume responsibility for any damage or injury resulting from incorrectly installed parts American LandMaster suggests that...

Page 2: ...figure 1 Remove the cover from the electrical cover with a 5 16 socket or wrench See figure 2 Slide the t slot nut into the channel on the soundbar housing with one at each end of the channel Tighten...

Page 3: ...ghten the screws See figure 5 Center the soundbar on the crossmember and ensure that it will not interfere with the roof On standard units the soundbar will be on the rear of the crossmember on crew u...

Page 4: ...don t plan to use them they can be tucked behind the sidebar and secured with a zip tie See figure 11 Turn the unit key to the run position and power on the soundbar Connect to your Bluetooth device a...