19148 Winch Installation Guide Rev A
Page 2 of 10
ASSEMBLY INSTRUCTIONS:
Instructional video: In Process
Preliminary Dis-assembly instructions:
1-
Remove windshield, if equipped.
2-
Remove the hood. Remove three screws from each front fender and two screws from the front hood. Lift the hood off
and set aside. If the vehicle has turn signals, disconnect the amber lights by depressing the release tab on each turn
signal lamp connector and pull apart. Do not separate by pulling on the wires. Set the hood aside where it will not be
damaged.
Figure 2: Removing Three Fender Fasteners
Figure 3: Removing Two Hood Fasteners
3-
Remove the Black Instrument panel cover. Unscrew each stainless steel fasteners that holds down the black instrument
panel cover using a 4 millimeter Allen wrench. Place the fasteners in a small container so they do not get lost. Lift the
cover straight up and off the panel. Set the cover aside where it will not get damaged.
Figure 4: Removing Black Instrument Panel Cover
Black Instrument
Panel cover
