A M E R I C A N I R O N H O R S E V E H I C L E S P E C I F I C A T I O N S
13
1-2
H.
Tire Specifications:
•
FOLLOWING PROPER PROCEDURES FOR YOUR MOTORCYCLE TIRES AND RIMS IS CRITICAL TO YOUR
SAFETY.
•
USE ONLY TIRES MEETING AMERICAN IRONHORSE SPECIFICATIONS AS OUTLINED IN THE “AMERICAN
IRONHORSE CONSUMABLE TABLE.” NEVER MISMATCH TIRES, TUBES, RIMS OR AIR VALVES – THIS
COULD RESULT IN TIRE FAILURE.
•
ALWAYS USE TUBED TYPE TIRES WITH WIRE SPOKE WHEELS AND TUBELESS TYPE TIRES WITH CAST,
DISC OR BILLET WHEELS. IN ADDITION, PROTECTIVE RUBBER RIM LINERS MUST ALWAYS BE
EMPLOYED WITH WIRE SPOKE WHEELS.
•
NEVER SWAP FRONT AND REAR TIRES. THEY ARE NOT INTERCHANGEABLE AND CAN LEAD TO
VEHICLE INSTABILITY IN USE.
•
NEVER EXCEED MAXIMUM INFLATION PRESSURE AS INDICATED ON TIRE SIDEWALL.
•
NEVER INSTALL A NEW WHEEL/TIRE ASSEMBLY WITHOUT PROPER BALANCING.
Tire Size
Wheel Size
Front
All Models
90/90-21
21" x 2.15"
Rear
Legend, Outlaw
240/40VR-18
18" x 8.50"
LSC, Slammer, Tejas, Texas Chopper
280/35VR-18
18" x 10.5"
AmIronOwnerManual_body_06.qxp 5/22/2006 9:23 AM Page 13
