1. Carefully unclip the dash trim bezel from above the climate controls.
2. Remove the (2) screws securing the top of the Radio/climate control trim bezel,
carefully unclip and remove bezel.
3. Remove the (4) screws securing the radio to the sub-dash.
4. Carefully slide radio out of the dash, disconnect all wire harnesses and antenna lead
(if applicable) and remove radio.
5. Remove the top and bottom mounting brackets from the factory radio; you will need to
attach these brackets to the installation kit following the instructions in the kit.
DASH DISASSEMBLY INSTRUCTIONS
1990-1996 CADILLAC FLEETWOOD / FLEETWOOD BROUGHAM
1. Attach top factory mounting bracket (using carriage bolts and nuts supplied with kit)
to top edge of kit.
2. Attach bottom factory mounting bracket (using carriage bolts and nuts supplied with
kit) to bottom edge of kit.
FACTORY BRACKET ATTACHMENT INSTRUCTIONS
FIG. 2
REMOVE ALL MOUNTING TABS ON THE SIDE BRACKETS.
REMOVE (4) SIDE MOUNTING TABS ON ISO TRIM RING.
Attach ISO mounting brackets to
radio components using screws
supplied with kit or radio
Attach trim ring to brackets
before tightening radio
mounting brackets
GM-K422
View of the Top Edge
View of the Bottom Edge
ISO MOUNT INSTRUCTIONS
6
