Part No. 122207-000, Rev. 1
(Continued)
MicroMax GPS350 Quick Reference Guide
3 of 4
© 2016-2017 American Innovations,
Power
GPS Antenna
Connection
Connect Power Cable
Connect GPS Antenna Cable to
MicroMax GPS350
3
Connect red/white twisted wire cable to
INPUT
connection on Power Cable. Then clip alligator clips
to rectifier AC taps. Voltage range is 8 - 42 V AC.
1
Connect GPS antenna cable to
MicroMax GPS350
GPS Antenna
connection.
2
Place GPS antenna outside of rectifier
in an area with a clear view of the sky.
1
Connect Power Cable to
MicroMax GPS350
Power
connection.
GPS350 Power Connection
2
OPTIONAL:
If external relay is used, connect relay
control or coil to Power Cable
OUTPUT
. Be sure
to observe proper polarity, especially if a flyback
diode is present on a mercury relay coil.
Power Cable
OUTPUT
Alligator Clips
on Rectifier Taps
Power Cable
GPS Antenna
GPS350 GPS
Antenna Connection
Twisted Wire Cable Connected to Power Cable
Power
GPS Antenna
Connection
4
3
WARNING:
Ensure that the antenna connection does not come into contact with any conductive surface of the rectifier.
