35363-3-1015
Page 46
REMOTE CONTROL OPERATION INSTRUCTIONS
NOTICE:
ON/OFF rocker switch must be ON for the remote to
operate.
Features
:
Main Burner ON/OFF
Main Burner flame modulation (6 levels)
Choice of standing or intermittent pilot
Thermostat or Smart thermostat functions
On/Off relay*
Comfort Fan speed modulation (6 levels)
Accent Light modulation (6 levels)
LOW BATTERY INDICATOR
ROOM
TEMPERATURE
CPI MODE
COMFORT FAN
FLAME ON
THERMOSTAT
OFF/ON/SMART
TRANSMISSION
KEY LOCK
ACCENT
LIGHT
Remote Control Information
Supply Voltage: 4.5 V (three 1.5 V AAA batteries)
Ambient Temperature Ratings: 0 - 50°C (32 - 122°F)
Radio Frequency: 315 MHz
NOTICE:
THE TRANSMITTER AND RECEIVER ARE RADIO
FREQUENCY DEVICES. PLACING THE RECEIVER IN OR
NEAR METAL SEVERELY REDUCES THE SIGNAL RANGE.
NOTICE:
TURN “OFF” THE MAIN GAS SUPPLY OF THE APPLI
-
ANCE DURING INSTALLATION OR MAINTENANCE OF THE
RECEIVER DEVICE.
NOTICE:
FOR INSTALLATION/MAINTENANCE, SWITCH OFF
THE INSERT BY REMOVING MAIN POWER SUPPLY AND BAT-
TERIES IF INSTALLED.
WARNING
• FIRE HAZARD. Can cause severe injury or death.
• The Transmitter causes ignition of the appliance. The
appliance can turn on suddenly.
• Keep away from the appliance burner when operating
the remote system.
Figure 57b
Figure 57a
Blue LCD display
UP/DOWN Arrow Button
ON/OFF Button
THERMOSTAT Button
MODE Button
