4
RT-96400C-SL COMPONENTS
The RT-96400C-SL consists of the following components:
1) RT-980C-1470
1) RT-980C-1530
1) RT-980C-1530 2) SR-20 2)PSR-2
1) RT-980C-1490
1) RT-980C-1550
1) RT-980C-1530 8) PCSC/UPC-0.4
1) RT-980C-1510
1) RT-980C-1570
1) MTX-CWDM-8 6) BPS-2
The individual 980C-XXXX series video rack cards that make up the RT-96400C-SL are
combined in a rack mount configuration using the SR-20 sub-rack. Please refer to the
instruction manuals for the SR-20 and the PSR-2 for information on the installation of the sub-
rack with its power supply.
The individual 980C-XXXX series rack cards can slide into any of the open slots in the SR-20
sub-rack, however, the recommended configuration is shown below. The lowest wavelength
video card, the RT-980C-1470 is installed on the right side of the sub-rack next to the power
supply. The RT-980C-1490 is installed next to the RT-980C-1470 and so on as shown below.
Following this configuration allows the fiber ports on the back of the 980C series cards to best
line up with its associated ports on the CWDM unit. Use a small screwdriver to push and lock
the ¼ turn fasteners into place.
The Multi-Channel Digital Video CWDM that optically multiplexes the six video rack cards used
in the RT-96400C-SL is labeled MTX-CWDM-8. It should be mounted in-between the
corresponding SR-20 subracks with a ½ RU space between the three components. To
maximize the performance and life of the system, installing a fan above the upper SR-20
subrack is recommended to pull air up across the RT-96400C-SL components.
There are 6 blank slots on the sub-rack which can support a redundant power supply (using the
SR-20H, PSR-2H), data or any other AFI product.
!
af i
af i
american fibertek
af i
af i
af i
af i
!
af i
af i
af i
af i
af i
