6
MTX-8810C STATUS INDICATORS
The MTX-8810C transmitter provides the following front panel LED status indicators to
aid in installation and troubleshooting:
DATA
These indicators turn green when any data activity is present. An active DATA 1 LED
indicates data is present at the input /output terminals of the MTX-8810C. An active
DATA 2 LED indicates the MTX-8810C has seized the data carrier to allow data flow.
The intensity of the indicators will vary with input / output data patterns, however, the Tx
and Rx Carrier Detect LEDs will typically appear dimmer than the Sensornet Tx and Rx
LEDs. The data activity associated with these front panel DATA LEDs are listed below.
DATA 1 TX
DATA 1 RX
DATA 2 TX
DATA 2 RX
Sensornet Tx
Sensornet Rx
Tx Carrier Detect
Rx Carrier Detect
OLI
A bi-color LED indicator monitors the optical input power of the data signal that is being
received at the MTX-8810C from the MRX-8810C. AC power and optical input status
associated with this LED are summarized below.
Optical Level Indicator
AC Power Status
Optical Status
Green
On
Proper Optical Input Power Present
Red
On
Optical Input Not Detected
Off
Off
Check Power Supply Input
VIDEO
A bi-color LED indicator is provided for each of the eight video channel inputs. AC power
and video status associated with each of these LEDs are summarized below.
Video Presence LED
AC Power Status
Video Status
Green
On
Proper Input Video Present
Red
On
Input Video Not Detected
Off
Off
Check Power Supply Input
