3
IMPORTANT NOTICE:
CONNECTING FIBER TO MTM-1410:
Due to recent changes made by Pelco to the circuit board in their back box, it is
now necessary to insure the housing of the ST fiber connector is non-conductive.
This is accomplished by including a factory installed non-metalic patchcord with
each unit. Please do not remove this patchcord. Failure to use this patchcord
when installing this unit in the back box will result in damage to the back box
circuit board and possibly the MTM-1410.
MTM-1410 installed into back-box.
Note routing of fiber cable between black plastic dome enclosure and metal housing.
FIBER
CABLE
