background image

ii

Class 3 Compressor Owner’s Manual

American Eagle Compressors are designed

to provide safe and dependable service for

a variety of operations.  With proper use and

maintenance, American Eagle Compressors

will operate at peak performance for many

years.

This manual contains information vital to the

safe use and efficient operation of this unit.

Following the information provided within this

manual can ensure  the longevity of the

compressor.  Carefully read and study the

operator’s manual before using the unit.

Failure to adhere to the instructions could

result in property damage or even serious

bodily injury to the operator or others close

to the compressor. 

A copy of this manual is provided with every

compressor and shall remain with the

compressor at all times.  Information

contained within this manual does not cover

all maintenance, operating, or repair

instructions pertinent to all possible situations.

This manual is not binding.  

American Eagle reserves the right to

change, at any time, any or all of the items,

Introduction

components, and parts deemed necessary

for product improvement or

commercial/production purposes.  This right

is kept with no requirement or obligation for

immediate mandatory updating of this

manual.

This product manual is not intended as a

training manual for beginners or unskilled

operators.  This manual offers guidelines for

correct and safe usage of the compressor,

maintenance, and troubleshooting.  If more

information is required or technical

assistance is needed, please contact AE

Technical Support.

Some sections of this manual contain

information pertaining to all American Eagle

manufactured compressors and may or may

not apply to your specific model. 

If this manual becomes damaged,

misplaced, or unreadable at any point, or if

you feel that any part of this manual is

unclear or incorrect, please contact AE

Technical Support at 800-321-3741 or email

at [email protected]

Technical Questions, and Information

[email protected]

Order Parts

[email protected]

Warranty Information

[email protected]

For Technical Questions, Information, Parts, or Warranty, Call Toll-Free at 

800-321-3741

Hours: Monday - Friday, 8:00 a.m. - 5:00 p.m. CST

Or email at the following addresses:

Summary of Contents for SHD 43































Reviews: