RASO AND RASI SERIES SPEEDDOME OPTIMA
8000-2692-13, REV. B1
QUICK REFERENCE GUIDE
2 of 6
Dome Features
The SpeedDome Optima programmable dome
camera provides the following features:
•
22X optical zoom/4X digital zoom
(88X maximum total zoom).
•
>450 lines horizontal resolution
•
Zoom Adjusted Programming (ZAP)
•
Auto Focus / Auto Iris
•
Auto White Balance
•
Automatic Gain Control (AGC)
•
Line-lock
•
Up to 96 presets (system dependent)
•
Three patterns
•
Apple Peel
•
Dome Flip (rotate 180
°
)
•
One alarm input
•
One auxiliary output
•
Power-on functional tests
•
LED diagnostics
In addition, the dome may be used with the
Manchester, RS-422, RS-485, or SensorNet
protocols.
Although SpeedDome Optima does not provide
on-screen programming via the dome firmware, the
connected controller may be used to configure
many settings. These settings include:
•
Programming presets and patterns
•
Vertical phase adjustment (V-phase)
•
Auxiliary output control
The following table provides additional information
about the supported controller functions with the
protocol used. The actual features supported may
differ for your controller.
Table 1: Protocols and supported features
Feature SensorNet RS-422 Manchester
Maximum
Presets
96 (a)
96 (a)
64
Maximum
Patterns
3 3 3
Resume
Auto Focus
/ Auto Iris
(b)
Yes Yes Yes
Dome
Reset
Yes Yes Yes
V-Phase
adjustment
Yes Yes Yes
Auxiliary
output
control
Yes Yes Yes
(a) The actual number of available presets may
differ based on the controller used.
(b) Pressing the Iris Open and Iris Close buttons
simultaneously returns to auto focus and auto
iris mode.
For specific information about the features
supported, see the operator's manual for your
controller.
Controlling the Zoom
Setting
Zoom stop settings define how the zoom function is
partitioned. Depending on the current zoom level,
the camera will either stop at the first zoom stop
setting or continue to the maximum zoom setting.
For SpeedDome Optima, the first zoom stop
setting is 22X (maximum optical zoom). The
maximum zoom is 88X (maximum digital zoom).
To switch between optical and digital zoom levels,
press the
Zoom In
(Zoom Tele) button until the first
zoom stop is reached. Release the button for at
least one second and press
Zoom In
again to
continue into the digital zoom range. Zooming
stops when the maximum zoom is reached.
Refer to your controller instructions for information
about the location of the zoom control buttons.
