Intellex® RMS Installation Note
8
The Export Player
The Intellex Player software is required to play back exported video clips. This player can
be exported with the video clips to a CD and the player must be installed on the PC to
be used for review. It only needs to be installed once. The minimum requirements for a
PC used for playback with the Intellex Player software are:
•
600 MHz Intel Pentium processor or faster
•
10 MB Hard Drive space for installation, and additional hard drive space if video
storage is planned.
•
128 MB of RAM
•
CD-ROM drive
•
SVGA video card that supports Direct Draw.
•
Microsoft Windows NT 4.0 (Service Pack 6), Windows 98 SE, Windows 2000, or
Windows XP operating system.
The information in this document was current when published. The manufacturer reserves the right to revise
and improve its products. All specifications are therefore subject to change without notice.
Under copyright laws, the contents of this document may not be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine-readable form, in whole or in part, without prior
written consent of Sensormatic Video Systems Divsion.
©Copyright 1999-2003 Sensormatic Electronics Corporation
Intellex
®
and Touch Tracker
®
are registered trademarks and Network Client
™
is a trademark of
Sensormatic Electronics Corporation.
Customer Service
Thank you for using American Dynamics products. We support our products through an extensive
worldwide network of dealers. The dealer through whom you originally purchased this product is your point
of contact if you need service or support. Our dealers are empowered to provide the very best in customer
service and support.
Dealers should contact American Dynamics at (800) 507-6268 or (561) 912-6259 or on the Web at
www.americandynamics.net.
Part Number 8200-0243-00 B0
