Quick Setup Guide
7
3. Install, Configure and set the Network Camera
The IP Bullet Camera default setting is DHCP OFF. You can build the IP Bullet Camera working environment with a
static IP address. The default static IP is
192.168.1.168.
You can set an IP address for the IP Bullet Camera
if the LAN unit isn’t connected to a DHCP server. Or turn on the
DHCP setting to use the DHCP protocol if the DHCP server is working in the LAN. The IP Bullet Camera will obtain
an IP address automatically from the DHCP server.
The IP Bullet Camera is linked by its Video Out connection via a BNC connector to a monitor's Video In connection.
If this connection is enabled, you will see some information on the monitor screen, such as, the
IP Bullet Camera
factory default Static IP address.
1. Check the IP class of your PC
Step 1:
Select
Settings
from the
Start
menu, and then click
Control Panel
.
Step 2:
Double-click the
Network Connections
icon. The
Network Connections
dialog box appears.
Step 3:
Click the
Protocols
tab in the
Network Connections
dialog box.
Step 4:
Select
Internet Protocol (TCP/IP)
and click
Properties
.
Step 5:
Select
Use the following IP Address
to indicate that you do not wish to use the DHCP, and assign IP
Address 192.168.1.200 with Subnet mask 255.255.255.0. Click
OK
when you finish.
Step 6:
Choose
Close
to finish the modification.
2. Install UPnP Packets of your PC
Microsoft Windows XP
®
does not start the UPnP service by default. Some packets must be installed before it is
initialized, as described below.
Step 1:
Select
Set Program
Access and Default
from the
Start menu
.
Step 2:
Click the
Add/Remove Windows Components
button when the
Add or Remove Programs
dialog box
appears.
Step 3:
Check the
Network Services
in the
Windows Component Wizard
dialog box, and then click
Details…
.
Step 4:
Check
UPnP User Interface
, and choose
OK
.
Step 5:
Click
Next
when the original
Network Component Wizard
dialog box returns. After about one minute the
UPnP installation is complete.
Step 6:
Select
Finish
to close.
3. Turn on Services of your PC
After installation, turn on the relative services to start the UPnP protocol, as described below.
Step 1:
Select
Settings
from the
Start
menu, and then click
Control Panel
.
Step 2:
Double-click the
Administrative Tools
icon. The
Administrative Tools
dialog box appears.
Step 3:
Click the
Services
icon in the
Administrative Tools
dialog box.
Step 4:
Double-click the
SSDP Discovery Service icon
when the
Services
dialog box shows up.
Step 5:
Choose
Automatic
in the
Startup type
, and click
OK
to start it. The
Services
dialog box appears again.
Step 6:
Double-click the
Universal Plug and Play Device Host
icon.
Step 7:
Choose
Automatic
in the Startup type, press the
Start
button, and click
OK
to start it.
Step 8:
Restart your system.
4. Set the static IP address in the Network camera.
Step 1:
Plug in the IP Bullet Camera power connection.
Step 2:
Plug the USB connector in
to your PC’s USB socket and the other end of the connector in the camera. A
window pops up asking if you want to "Run the program", "Open folder to view files", or "Take no action".
Step 3:
Choose "Run the program" and click "
OK
", and the "USB configuration" window will pop up.
Summary of Contents for illustra 400 ADCi400-B021
Page 2: ...2 Quick Setup Guide...
Page 7: ......
