20
Simplex Multiplexer
Global Dwell
The
GLOBAL DWELL
menu allows you to set the camera
switching rate. The
GLOBAL DWELL
setting determines the
rate at which the cameras are sequenced full screen when
se-
quence
(
up arrow
) is selected. It also determines the rate the
monitor switches cameras during multiple alarms.
Set the
GLOBAL DWELL
time in seconds using the
up
and
down
arrow
buttons. You may enter any setting between
1
and
99
seconds. This setting applies to all cameras.
NOTE: The GLOBAL DWELL setting only affects the on-screen
camera display. It does NOT affect the rate at which
camera images are sent to the VCR.
The default
GLOBAL DWELL
setting is
02 SECS
.
When you are finished with this menu, do one of the following:
• press
VCR VIEW
to go to the next menu.
• press
FVCR VIEW
to save the settings and exit
setup.
Camera Titles Menu
The Camera Titles menu allows you to assign an alphanumeric
title to each camera input. It also provides access to the mo-
tion detection setup screen.
The camera number is the default title. To change a title, use
the
arrow
buttons to position the flashing highlight on each
character and set its value. A title can contain up to 10 charac-
ters selected from the following: 0–9, A–Z, :, /, +, - or space.
When you are finished setting a title, do one of the following:
• press
FUNCTION
to display the motion detection screen (de-
scribed below) for the current camera.
• press a
CAMERA
button to set that camera’s title.
• press
VCR VIEW
to set the next camera title.
• press
VCR VIEW
after the last camera title to go to the next
menu.
• press
FVCR VIEW
to save the information and
leave the setup system.
