18
Simplex Multiplexer
Quad Record Option
(four-camera models only)
This option allows you to record quad images rather than the
default full screen image recording. The quad image must be
displayed to record in quad mode.
ON
— With quad displayed, records the quad image.
OFF
— Will NOT record a quad image, or display quad in
record mode, only full-screen images sent in record mode.
The default
QUAD RECORD OPTION
is
OFF
.
Image Tenderizer
This feature dramatically reduces the shakiness associated with
high resolution compressed multicamera images. During regu-
lar operation press
FUNCTION
to temporarily toggle to the
other setting to decide whether to use
ON
or
OFF
.
ON
— Activates the special filtering circuit when the Sim-
plex displays a multicamera image on the main monitor.
OFF
— Turns off the special filtering circuit.
The default
IMAGE TENDERIZER
setting is
OFF
.
When you are finished with this menu, do one of the following:
• press
VCR VIEW
to go to the next menu.
• press
FVCR VIEW
to save the information and
leave the setup system.
VCR Record Time
NOTE: If the Simplex alarm output will not be connected to the
VCR’s alarm input, use the same settings for both VCR
RECORD TIME and VCR ALARM RECORD TIME.
This menu allows you to enter the normal (nonalarm) record-
ing speed for the VCR. Use the
up
and
down arrow
buttons to
set the speed in hours. The longer you hold the
arrow
button,
the faster the setting changes. You may use any setting be-
tween
1
and
999
hours.
The default setting for
VCR RECORD TIME
is
024 HRS
.
