InDoor mountIng oPtIons
Mount
Description
Compatibility
Construction
Dimensions
Weight
Model
Number
I-Beam Mount
Assembly
This assembly allows the dome to be
suspended from an I-beam; and includes
a clamp, pipe tee nipple, and flange. The
clamp attaches to a 1.25 inch pipe, provided
by the customer, then affixes to the pendant
hardware. The housing or dome assembly
also mounts to the structure.
SpeedDome Ultra
Series and IP
SpeedDome
Steel and
Galvanized steel
6 m [max.] x 293 x 127 mm
(20 ft [max.] x 12 x 5 in)
2.9 kg
(6.4 lbs)
RHIUIBM
Indoor Pendant
Mount
This mount suspends a SpeedDome Ultra
or a SpeedDome Optima housing from
a ceiling or horizontal surface. It can be
installed using either 1.25 inch NPT threaded
pipe or rigid conduit, new or existing, up to
10' (3 meters) in length.
SpeedDome
Ultra, Optima
Series, and IP
SpeedDome
Powder-coated
aluminum and
ABS plastic
115 x 120 x 120 mm
(4 .5 x 5 x 5 in)
1.8 kg
(4 lbs)
RHOPN
Hard Ceiling
Bracket
This bracket enables the Top Hat housing to
be recessed in the ceiling (requires RHIUTH
Top Hat). The bracket is mounted to the
Top Hat and installed in a hole cut in the
ceiling — perfect for sheet rock, plaster or
solid ceilings. The hard ceiling bracket can
be installed entirely from below the ceiling;
the installer will not have to access the area
above the ceiling to install it.
SpeedDome Ultra
Series
Galvanized steel
212 x 179 x 56 mm
(8 x 7 x 2 in)
70 kg
(1.6 lbs)
RHIUHC
Fixed Bracket
Used with the RHIUTH Top Hat, this bracket
enables the housing to be recessed in the
ceiling or in a 2-foot drop ceiling tile. The
bracket is mounted to the Top Hat housing
and installed in a hole cut in the ceiling.
The bracket distributes the weight of the
dome and Top Hat housing across the T-bar
framework of the ceiling. It is also very useful
for sheet rock, plaster, or solid ceilings.
SpeedDome Ultra
Series
Galvanized steel
180 x 632 x 100 mm
(7 x 24 x 4 in)
1.8 kg
(4 lbs)
RHIUFB
Adjustable
Bracket
Used with the RHIUTH Top Hat, this bracket
enables the housing to be recessed in drop
ceilings that utilize anything other than 2-foot
grids. The bracket distributes the weight of
the dome and the Top Hat housing across
the T-bar framework of the ceiling and is
adjustable from 632-1219 mm (24-48 in)
SpeedDome Ultra
Series
Galvanized steel
180 x 1219 x 100 mm
(7 x 48 x 4 in)
2.3 kg
(5 lbs)
RHIUAB
2’ x 2’ Tile
Mount
This mount enables the Top Hat housing
to be recessed in a 2' x 2' drop tile ceiling.
The ceiling tile is removed and the white tile
mount is simply dropped in its place. A Top
Hat housing and plastic base are included
in the kit.
SpeedDome Ultra
Series
Powder-coated
aluminum and
ABS plastic
190 x 607 x 607 mm
(7 x 24 x 24 in)
2.7 kg
(6 lbs)
RHIU2X2M
2’ x 2’ Tile
Pendant
Mount
This mount enables the pendant mount
to be installed in a 2' x 2' drop tile ceiling.
The Top Hat housing/dome assembly also
mounts to the structure. The mounting
kit includes a 2' x 2' plate and pendant
hardware. The plate attaches to a 1.25 inch
pipe, provided by the customer, then affixes
to the Top Hat housing/dome assembly. If
mounting a SpeedDome Optima with this
model, a RHOPN ceiling pendant mount kit
is required.
SpeedDome Ultra
and Optima Series
Powder-coated
aluminum and
ABS plastic
47 x 605 x 605 mm
(2 x 23 x 23 in)
5.4 kg
(12 lbs)
RHIU2X2P
2’ x 2’ Tile
Mount Plate
This mount enables the dome to be
recessed in a 2' x 2' drop tile ceiling. The
ceiling tile is removed and the tile mount is
simply dropped in its place.
SpeedDome
Optima Series
Painted
aluminum
47 x 605 x 605 mm
(2 x 23 x 23 in)
1.7 kg
(3.8 lbs)
RH2X2
39
Indoor Mounts
+
Mount Adapters
A complete line of indoor and outdoor mounts is available to suit
any mounting requirement. The cameras are lighweight and
compatible with IP SpeedDomes, SpeedDome Ultra, SpeedDome
Optima, and the Ultra Drone series. Choose from a variety of
ceiling, wall, pendant, corner, pole, and over-the-roof models as
well as assemblies for dome, housing, and cap for safe and
efficient installations.
