Controls, connectors and indicators (continued)
[Y/C OUT] Y/C output connector
This 4-pin connector outputs the luminance and chrominance
signal.
• Pin configuration of Y/C OUT connector
5
[SYNC IN] Sync signal input connector
This BNC connector accepts the input of an external sync sig-
nal such as a composite video (VBS) or black burst (BB) signal.
When a sync signal is input into this connector, the camera
operation is automatically synchronized with the external sync
signal.
The 75-ohm termination of this connector can be switched
on/off on the menu screen as required. (For details, see
“TERM. [75-ohm termination setting]” on page 7.)
[VIDEO OUT] Video signal output connector
This BNC connector outputs a composite video signal. Con-
nect this to the video input connector of a video monitor,
switcher, etc.
[POWER] Power indicator lamp
This lights when power is supplied to the camera.
1
2
3
4
Pin No.
Signal
1
GND
2
GND
3
Luminance (Y, 1 V(p-p), 75-ohm)
4
E type: Chrominance (C, 0.3 V(p-p), 75-ohm)
U type: Chrominance (C, 0.286 V(p-p), 75-ohm)
[CAMERA SET UP] Camera set-up screen operation buttons
These buttons are used in the set-up operations.
For details, see “Set-up functions” from page 6.
[VIDEO IRIS] Video iris connector
Connect to an auto-iris lens incorporating an EE amplifier. (See
“Lens” on page 14.)
[DC12V
}
/AC24V
`
] Power input connector
Connect a DC 12 V
}
± 10% or AC 24 V
`
± 10%, 50/60 Hz
power supply.
DC12 V
Power
AC24 V
Power
1
2
AC 24V
DC 12V
+
–
+
–
11
12
VIDEO GND + 9 V
1
+
2
–
AC 24V
DC 12V
CLASS 2 ONLY (For U.S.A use)
ISOLATED POWER ONLY (For EUROPEAN use)
SEE INSTRUCTION
MANUAL
CAMERA
SET UP
SYNC
IN
VIDEO
OUT
POWER
Y/C OUT
SET
VIDEO IRIS
10
8
9
13
14
Summary of Contents for ADC860
Page 92: ...SC96792 002...
