450331 - 1
www.amdry.com
7
Sail Switch Removal:
Remove the back guard. As shown in picture remove the
two hex head screws.
The sail switch box assembly will now come apart in two
pieces.
Remove the screws/nuts associated with the sail switch and
remove it from the bracket.
Ignitor Probe Assembly Removal:
Remove the back guard, disconnect the orange boot from
the DSI module by simply pulling off.
Remove the one Phillips head screw that is holding the ignitor
probe to the ignitor bracket.
Remove black plastic ring protector from the ignitor bracket
and remove ignitor and wire from the machine.
Flame-Probe Removal:
Remove the back guard, disconnect the white single
connector on the flame-probe.
Remove the one Phillips head screw on top of the ignitor
bracket holding the flame-probe. Pull the probe up and out
of the machine.
