450331 - 1
www.amdry.com
5
Door Switch Removal:
Open the main door. Remove the two Phillips head screws
attaching the door switch housing to the front panel.
Disconnect the two wires on the door switch. Remove the
two Phillips head screws (and associated nuts and star
washers) holding the door switch to the door switch housing.
Top or Bottom Front Panel Removal:
Top Panel
: Remove the lint drawer. Remove the computer
panel assembly. Remove the ten screws holding the panel
to the dryer. Lift up and pull out the panel about 8-inches or
so.
Disconnect the door switch wires (blue wires) from the
connector, connected to the connector on the side of the
wrapper. Totally remove the panel from the dryer.
Bottom Panel
: Remove the lint drawer. Remove the ten
screws (this is the bottom only) on the front panel. Lift up
and pull out the panel about 8-inches or so. Disconnect the
door switch wires (blue wires) from the connector, connected
to the connector on the side of the wrapper. Totally remove
the panel from the dryer.
Lint Door Switch Removal:
Remove the lint drawer. Remove the two screws that are
holding the lint door switch, pull out the lint switch, disconnect
the two wires on it. Replace the switch.
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
