background image

Please Note:

 Specifications and improvements in the design 

of this unit and this manual are subject to change without any 
prior written notice.

 X-Scan LED Plus   

   

                     Specifications

Model:    

 

X-Scan LED Plus

Voltage*:

 

 

 

100 ~ 240V 50Hz/60Hz “Auto Sensing”

LEDs:

   

 

 

1 X 10 Watt LED

Power Consumption: 

40W

Dimensions: 

 

 

8”(L) x 6”(W) x 15.25”(H)

 

 

 

 

200mm x 150mm x 386mm

Colors:

 

 

 

RGB + White

Weight:

 

 

 

9.9 Lbs. / 4.5 kgs.

Fuse:

   

 

 

2 Amp

Duty Cycle:

   

 

None

DMX: 

 

 

 

8 DMX Channels

Sound Active:

 

 

Yes

Working  Position:

   

Any Safe, Secure Position

Warranty:

 

 

 

3 Year (1095 days)

American DJ

®

  -  www.americandj.com  - X-Scan LED Plus Instruction Manual Page 19

Auto Sensing Voltage:

 This fixture contains a electronic bal-

last, which will auto sense the voltage when it is plugged into the 
power source.

American DJ

®

 

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.americandj.com / E-mail: [email protected]

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandjeurope.com

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

Summary of Contents for X-Scan LED Plus











Reviews: