![background image](http://html1.mh-extra.com/html/american-dj/x-color-led/x-color-led_user-instructions_2923248005.webp)
American DJ
®
- www.americandj.com - X-Color LED™ Instruction Manual Page 10
American DJ
®
- www.americandj.com - X-Color LED™ Instruction Manual Page 9
SLND -
This will let you set unit as a slave in a master/
slave configuration.
1. Tap the MENU button until “
SLND
” is displayed, press
ENTER. Either “
SL 1
”, “
SL 2
”, “
SL 3
”, or “
SL 4
” will be displayed.
2. Tap the UP or DOWN buttons until your desired slave mode
setting is displayed, press ENTER to confim. Each slave mode
is a different light show.
NOTE:
In a Master/Slave configuration you can set one fixture
to Master and then set the next fixture to “
SL 2
”, the fixtures will
now have contrast movement to each other.
SOUN -
Sound Active mode.
1. Tap the MENU button until “
SOUN
” is displayed, press
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to activate sound active mode, or
“
OFF
” to deactivate sound active mode.
3. Press ENTER to confirm.
BLND -
Blackout or Stand by mode.
1. Tap the either the MENU button until “
BLND
” is displayed,
press ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to confim and exit. The fixture will now
be in Blackout mode. To deactivate Blackout mode, select No
and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
X-Color LED™
System Menu
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm.
DISP
-
This function will reverse the display 180º.
1. Tap the MENU button until “
DISP
” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it
again. Press ENTER when you have made your desired setup.
TEST
- This function will run a self test program.
1. Tap the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test.
TEMP
- With this function you can check the temperature
of the fixture.
1. Tap the MENU button until “
TEMP
” is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
FHRS
- With this function you can display the running time
of the fixture.
1. Tap the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- With this function you can display the version soft-
ware of the fixture.
1. Tap the MENU button until “
VER
” is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to
X-Color LED™
System Menu