DMX MENU:
NOTE: Whenever a DMX signal is received, i.e., a XLR cable is
connected, the fixture will automatically go to the DMX Address
Setting.
Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs. This
function also allows you to use your fixtures as spot lights.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller such as the
Elation
®
Show Designer™ or the Elation
®
DMX Operator.™
2. To run your fixture in DMX MENU, plug in the fixture via the XLR
connections to any standard DMX controller. Set your desired
DMX address following the directions on page 8, and the set-up
specifications that come with your DMX controller.
NOTE:
Regarding 6, 9, 15, and 27 DMX Channel Modes:
When the
Channel 1 value is between 0-28, Channel 2 will control the speed
of the color fade. When the value of Channel 1 is between 29-255,
Channel 2 will control the speed of the macro program. Channel 3 will
always control the strobe speed.
24 DMX Channel Mode does not have Color Macro or Strobe feature.
Verti Color Operating Instructions
©
American DJ Supply
®
- www.americandj.com - Verti Color Instruction Manual Page 12
©
American DJ Supply
®
- www.americandj.com - Verti Color Instruction Manual Page 11
Verti Color Operating Instructions
Verti Color System Menu
ENTER button and the software vesion will be displayed.
2. Press the MENU button to leave this function.
1
d
SP
MENU -
1
d
SP
- This will “flip” the LED display
1. Tap the MENU button until “
1
d
SP
” is displayed, press ENTER.
2. Either “
1
d
SP
” or “d
SP 1
” will now be displayed. Press the UP
or DOWN buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button
for
at least three seconds
to confirm.
