You may run any of the built in chase patterns or one of your preset
chase patterns in four different modes “Audio,” “Speed,” “Glide,” or “Tap
Sync.” The next section of the manual will detail the proper operation of
these four modes.
Running a Chase Pattern with the Speed Slider:
This mode will allow to run your patterns according to the speed slider
adjustment. You may change the speed Slider adjustment at any time
while the chase pattern is running. Your adjustments to the speed slider
will affect the chase pattern in real time.
Step 1:
Select the pattern button(s) that stores the chase patterns
or scene you wish to activate. The select patterns LEDs will
glow indicating that pattern has been activated.
Step 2:
Once you have selected you chase patterns use the speed
slider to control amount of time it takes the chase to prog-
ress from scene to the next. This adjustment can range from
the minimum of 1/10 of a second progression to a maximum
of 10 minutes progression.
Running a Chase Pattern with the Audio Slider:
This mode will allow to run your patterns to the beat of music. You may
change the Audio Sensitivity at any time while the chase pattern is run-
ning. Your adjustments to the speed slider will affect the
chase pattern in real time.
Step 1:
Press the Audio Button to activate the Audio Mode.
Step 2:
Press the Chase Pattern Button that stores the chase pat-
tern you wish to activate. The chase pattern button’s LED
will com on indicating that chase has been activated.
Operation Cont.
©
American DJ Supply
®
www.americandj.com Stage Desk-16™ Instruction Manual Page 16
Running Chase Patterns and Scenes
Step 1
Step 2
Step 1
Step 2
Operation Cont.
©
American DJ Supply
®
www.americandj.com Stage Desk-16™ Instruction Manual Page 15
Programming with Audio Effect
The audio effect function allows you to program specified
channels to an internal audio bank. Only one scene can be
programmed using the Audio Effect and can only be acti-
vated by an audio source. This function will only work if
“Audio Mode” is activated while a chase pattern is running.
Step 1:
Turn off any chase patterns that may be running, by press-
ing the Blackout Button.
Step 2:
Press the Manual and Program Buttons to enter the pro-
gram mode.
Step 3:
Use the channel sliders to select the channels you want
activated by the “audio Effect.” Be sure the channels you
wish to program are set to their maximum levels and the
rest set to there minimum level.
Step 4:
Once you have set your channels, tap the Audio Button to
set this scene into the buffer memory.
Step 1
Step 3
Step 2
All manuals and user guides at all-guides.com
