Spinout™ Features
Congratulations and thank you for purchasing the American DJ
®
Spinout,
™
one of the finest pieces of its kind on the market today! The
Spinout™ is a great intelligent moonflower fixture. This unit is a great
piece for mobile DJ’s, clubs, roller rinks, bars, and bowling centers. When
used in multiples of two (2) or more, this unit creates an effect that rivals
that of units that can cost up to three times the price. The Spinout
™
was
designed to run in both master/slave and DMX modes. To customize
the operation of your Spinout,
™
we recommend using this fixture with a
standard DMX controller such as the American DJ
®
Show Designer
™
or
the American DJ
®
DMX Operator.™
The Spinout
™
features a bright 250 watt, ELC-3, long life lamp. This unit
also features a separate gobo and color wheel and has a four function
special effects wheel. The color wheel features seven brilliant colors plus
white and the gobo wheel features 9 gobos plus a large and small spot.
This unit is ready to be installed or hung and powered right out of the
box. There is no assembly required. This fixture incorporates the use of
high quality stepper motors for more accurate movements. An internal
built in microphone allows the fixture to run in Stand Alone mode so
there is no need for an external controller. The Spinout™ may also be
set-up to run in a Master-Slave mode when used in multiples of up to
16 units. When used in the Master-Slave mode, the unit will chase to
several internal programs. The Spinout™ can also be controlled via a
standard DMX controller giving the user independent control over the
gobo and color wheel as well as allowing you to control the effects wheel.
Spinout™ Features
• Do not spill water or other liquids in to or on to your unit.
• Be sure that the local power outlet match that of the required voltage
for your fixture.
• Do not attempt to operate this unit if the power cord has been frayed
or broken. Please route your power cord out of the way of foot
traffic.
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the top cover under any conditions. There are no user
serviceable parts inside.
• Disconnect the unit’s main power when left unused for long periods
of time.
• Never connect this unit to a dimmer pack
• Always be sure to mount this unit in area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Never block the ventilation holes.
• Do not attempt to operate this unit if it becomes damaged in
any way.
• Never operate this unit when it’s cover is removed.
Spinout™ Warnings
Please read and understand the instructions in this manual carefully and
thoroughly before attempting to operate this unit. These instructions
contain important information regarding safety during use and mainte-
nance. Please keep this manual with the unit for future reference.
Spinout™ General Instructions
©
American DJ Supply
® -
www.americandj.com - Spinout™ Instruction Manual Page 3
©
American DJ Supply
® -
www.americandj.com - Spinout™ Instruction Manual Page 4
